I  U  P  A  C






News & Notices

Organizations & People

Standing Committees

Divisions

Projects
..current
..completed
..new
..information

Reports

Publications

Symposia

AMP

Links of Interest

Search the Site

Home Page

 

 

Current Project

Polymer Division (IV)

 

Number: 2005-009-3-400

Title: Efficiency and reproducibility of temperature rising elution fractionation (TREF)

Task Group
Chairman:
Robert Brüll

Members: Petra Eiselt, Eric Gelade, Jerrie Vermeulen, Peter Mallon, Valerie Grumel, Dieter Lilge, Volker Dolle, Vincent Mathot, Georg Michler, Benjamin Monrabal, Harald Pasch, and Colin Li Pi Shan

Objective:
The aims of this project are (1) to fractionate a given number of Polyethylene (PE) test samples with regard to their composition using a given experimental procedure, (2) to compare the quantity and chemical composition of the obtained fractions in the partner laboratories, (3) to compare the results with regard to influence of the instrumental setup and reproducibility and (4) to establish suitable conditions for the compositional fractionation of polyethylene. Finally conclusions shall be drawn with regard to the comparability of the results and the robustness of TREF procedures in daily routine.

Description:
TREF is a technique which fractionates semicrystalline polyolefins from solution according to composition and microstructure. The technique has been invented in the late 1970s. In TREF the polymer is dissolved in a suitable solvent at elevated temperatures. Subsequently the solution is slowly cooled down to crystallize the sample. In the third step the sample is eluted by fresh solvent at successively rising temperatures. The fractions are collected and analyzed after workup. The instrumental setup and experimental parameters which are used vary between the different laboratories. Crystallization and elution can be carried out either in a column which is packed with a porous support or in a reactor without packing. As there was no commercial instrumentation available until the late 90s the equipment which is used is in most cases in-house constructed. The steps of crystallization and elution are influenced by the concentration of the polymer, the dimensions of the reactor, the type of support used and the cooling rate. However there are no guidelines about these parameters and little information is available in the literature. Therefore the results from different laboratories are difficult to compare. Due to the pivotal importance of TREF for the compositional fractionation of polyethylene it is highly important to compare the results between different laboratories. TREF is used in various countries, ranging from industrialized nations to developing countries.

Progress:

 

Last update: 15 December 2005

<project announcement to be published in Chem. Int. >

If you want to update this information, contact us by e-mail
Do not forget to include the Project Number,
your name and relation with that project


Page last modified 16 January 2006.
Copyright ©1997-2006 International Union of Pure and Applied Chemistry.
Questions or comments about IUPAC, please contact, the Secretariat.
Questions regarding the website, please contact Web Help.